\def\BPmessage{Proof Tree (bussproofs) style macros. Version 0.6c.}
% bussproofs.sty.  Version 0.6c
%     (c) 1994,1995,1996. Copyright retained by Samuel R. Buss.
%     This software may be used and distributed freely, except that
%     if you make changes, you must change the file name to be different
%     than bussproofs.sty to avoid compatibility problems.
%     This is a *prerelease* version and is subject to change.
%     Please report comments and bugs to sbuss@ucsd.edu.
%  Thanks to Felix Joachimski for making changes to let these macros
%	work in plain TeX in addition to LaTeX.  Nothing has been done
%	to see if they work in AMSTeX.  The comments below mostly
%	are written for LaTeX, however.

%  bussproofs.sty allows the construction of proof trees in the
%     style of the sequent calculus and many other proof systems
%     One novel feature of these macros is they support the vertical
%     alignment according to some center point specified with the
%     command \fCenter.  This is the style often used in sequent
%     calculus proofs.
%     Proofs are specified in left-to-right traversal order.
%       For example a proof    
%				A   B
%                               -----
%                          D      C
%                         ---------          
%                             E
%
%     if given in the order D,A,B,C,E.  Each line in the proof is
%     specified according to the arity of the inference which generates
%     it.  Thus, E would be specified with a \BinaryInf  or  \BinaryInfC
%     command.
%
%     The above proof tree could be displayed with the commands:
%	
%		\AxiomC{D}
%		\AxiomC{A}
%		\AxiomC{B}
%		\BinaryInfC{C}
%		\BinaryInf{E}
%		\DisplayProof
%
%     Inferences in a proof may be nullary (axioms), unary, binary, or
%     trinary.
%
%     IMPORTANT:  You must give the \DisplayProof command to make the proof
%      be printed.  To display a centered proof on a line by itself,
%      put the proof inside \begin{center} ... \end{center}.
%
%     There are two styles for specifying horizontal centering of
%     lines (formulas or sequents) in a proof.  One format \AxiomC{...}
%     just centers the formula {...} in the usual way.  The other
%     format is \Axiom$...\fCenter...$.  Here,  the \fCenter specifies
%     the center of the formula.  (It is permissable for \fCenter to 
%     generate typeset material; in fact, I usually define it to generate
%     the sequent arrow.)  In unary inferences, the \fCenter
%     positions will be vertically aligned in the upper and lower lines of
%     the inference.  Unary, Binary, Trinary inferences are specified
%     with the same format as Axioms.  The two styles of centering
%     lines may be combined in a single proof.
%
%     By using the optional \EnableBpAbbreviations command, various
%	abbreviated two letter commands are enabled.  This allows
%	\AX and \AXC for \Axiom and \AxiomC, (resp.),
%	\DP for \DisplayProof,
%	\BI and \BIC for \BinaryInf and \BinaryInfC,
%	\UI and \UIC for \UnaryInf  and \UnaryInfC,
%	\TI and \TIC for \TrinaryInf and \TrinaryInfC,
%	\LL and \RL for \LeftLabel and \RightLabel.
%     The enabling of these short abbreviations is OPTIONAL, since
%       there is the possibility of conflicting with names from other
%       macro packages.
%
%     By default, the inferences have single horizontal lines (scores)
%       This can be overridden using the \doubleLine, \noLine commands.
%       These two commands affect only the next inference.  You can make
%	make a permanent override that applies to the rest of the current
%       proof using \alwaysDoubleLine and \alwaysNoLine.  \singleLine
%	and \alwaysSingleLine work in the analogous way.
%
%     The macros do their best to give good placements of for the
%     parts of the proof.  Several macros allow you to override the
%     defaults.  These are \insertBetweenHyps{...} which overrides
%     the default spacing between hypotheses of Binary and Trinary
%     inferences with {...}.  And \kernHyps{...} specifies a distance
%     to shift the whole block of hypotheses to the right (modifying
%     the default center position.
%       Other macros set the vertical placement of the whole proof.
%     The default is to try to do a good job of placement for inferences
%     included in text.  Two other useful macros are: \bottomAlignProof
%     which aligns the hbox output by \DisplayProof according to the base
%     of the bottom line of the proof, and \centerAlignProof which
%     does a precise center vertical alignment.
%
%     Often, one wishes to place a label next to an inference, usually
%	to specify the type of inference.  These labels can be placed
%       by using the commands \LeftLabel{...} and \RightLabel{...}
%       immediately before the command which specifies the inference.
%       For example, to generate
%					A     B
%                                      --------- X
%                                          C
%
%       use the commands  \AxiomC{A}
%			  \AxiomC{B}
%			  \RightLabel{X}
%			  \BinaryInfC{C}
%			  \DisplayProof
%
%     The \DisplayProof command just displays the proof as a text
%	item.  This allows you to put proofs anywhere normal text
%	might appear; for example, in a paragraph, in a table, in
%	a tabbing environment, etc.
%     For displaying proofs in a centered display:  Do not use the \[...\]
%	construction (nor $$...$$).  Instead use 
%	\begin{center} ... \DisplayProof\end{center}.
%     Actually there is a better construction to use instead of the
%	\begin{center}...\DisplayProof\end{center}.  This is to
%	write
%		\begin{prooftree} ... \end{prooftree}.
%       Note there is no \DisplayProof used for this: the
%	\end{prooftree} automatically supplies the \DisplayProof
%	command.
%
%     Warning: Any commands that set line types or set vertical or
%	horizontal alignment that are given AFTER the \DisplayProof
%	command will affect the next proof, no matter how distant.
					



% Usages:
% =======
%
%   \Axiom$<antecedent>\fCenter<succedent>$
%
%   \AxiomC{<whole sequent or formula}
%          
%	Note that the use of surrounding {}'s is mandatory in \AxiomC and
%	is prohibited in $\Axiom.  On the other hand, the $'s are optional
%	in \AxiomC and are mandatory in \Axiom.  To typeset the argument
%	to \AxiomC in math mode, you must use $'s (or \(...\) ).
%
%   \UnaryInf$<antecendent>\fCenter<succedent>$
%
%   \UnaryInfC{<whole sequent or formula>}
%
%   \BinaryInf$<antecendent>\fCenter<succedent>$
%
%   \BinaryInfC{<whole sequent or formula>}
%
%   \TrinaryInf$<antecendent>\fCenter<succedent>$
%
%   \TrinaryInfC{<whole sequent or formula>}
%
%   \LeftLabel{<text>} - Puts <text> as a label to the left
%			  of the next inference line.  (Works even if
%			  \noLine is used too.)
%
%   \RightLabel{<text>} - Puts <text> as a label to the right of the
%			  next inference line.  (Also works with \noLine.)
%
%   \DisplayProof - outputs the whole proof tree (and finishes it).
%			The proof tree is output as an hbox.
%
%
%   \kernHyps{<dimen>}  - Slides the upper hypotheses right distance <dimen>
%			  (This is similar to shifting conclusion left)
%			- kernHyps works with Unary, Binary and Trinary 
%			  inferences and with centered or uncentered sequents.
%			- Negative values for <dimen> are permitted.
%
%   \insertBetweenHyps{...} - {...} will be inserted between the upper
%			  hypotheses of a Binary or Trinary Inferences.
%                         It is possible to use negative horizontal space
%   			  to push them closer together (and even overlap).
%			  This command affects only the next inference.
%
%   \doubleLine         - Makes the current (ie, next) horizontal line doubled
%
%   \alwaysDoubleLine   - Makes lines doubled for rest of proof
%
%   \singleLine		- Makes the current (ie, next) line single
%
%   \alwaysSingleLine   - Undoes \alwaysDoubleLine or \alwaysNoLine.
%
%   \noLine		- Make no line at all at current (ie next) inference.
%
%   \alwaysNoLine       - Makes no lines for rest of proof. (Untested)
%
%   \solidLine		- Does solid horizontal line for current inference
%
%   \dottedLine		- Does dotted horizontal line for current inference
%
%   \dashedLine		- Does dashed horizontal line for current inference
%
%   \alwaysSolidLine    - Makes the indicated change in line type, permanently
%   \alwaysDashedLine		until end of proof or until overridden.
%   \alwaysDottedLine
%
%   \bottomAlignProof   - Align proof according to it bottom line.
%   \centerAlignProof   - Align proof proof precisely in its center.
%   \normalAlignProof   - Overrides earlier bottom/center AlignProof commands.
%			  The default alignment will look good in most cases,
%				whether the proof is displayed or is
%				in-line.  Other alignments may be more
%				appropriate when putting proofs in tables or
%				pictures, etc.  For custom alignments, use
%				TeX's raise commands.

% Optional short abbreviations for commands:
\def\EnableBpAbbreviations{%
	\let\AX\Axiom
	\let\AXC\AxiomC
	\let\UI\UnaryInf
	\let\UIC\UnaryInfC
	\let\BI\BinaryInf
	\let\BIC\BinaryInfC
	\let\TI\TrinaryInf
	\let\TIC\TrinaryInfC
	\let\LL\LeftLabel
	\let\RL\RightLabel
	\let\DP\DisplayProof
}

% Parameters which control the style of the proof trees.
% The user may wish to override these parameters locally or globally.
%   BUT DONT CHANGE THE PARAMETERS BY CHANGING THIS FILE (to avoid
%   future incompatibilities).  Instead, you should change them in your
%   TeX document after including this style file in the documentstyle command.

\def\ScoreOverhang{4pt}			% How much underlines extend out
\def\ScoreOverhangLeft{\ScoreOverhang}
\def\ScoreOverhangRight{\ScoreOverhang}

\def\extraVskip{2pt}			% Extra space above and below lines
\def\ruleScoreFiller{\hrule}		% Horizontal rule filler.  
\def\dottedScoreFiller{\hbox to4pt{\hss.\hss}}
\def\dashedScoreFiller{\hbox to2.8mm{\hss\vrule width1.4mm height0.4pt depth0.0pt\hss}}
\def\defaultScoreFiller{\ruleScoreFiller}  % Default horizontal filler.  
\def\defaultBuildScore{\buildSingleScore}  % In \singleLine mode at start.

\def\defaultHypSeparation{\hskip.2in}   % Used if \insertBetweenHyps isn't given

\def\labelSpacing{3pt}		% Horizontal space separating labels and lines

\def\proofSkipAmount{\vskip.8ex plus.8ex minus.4ex}
			% Space above and below a prooftree display.

% End of user-modifiable parameters.

% Here are some internal paramenters and defaults.  Not really intended
%  to be user-modifiable.  

\def\theHypSeparation{\defaultHypSeparation}
\def\alwaysScoreFiller{\defaultScoreFiller}	% Horizontal filler.  
\def\alwaysBuildScore{\defaultBuildScore}
\def\theScoreFiller{\alwaysScoreFiller}	% Horizontal filler.  
\def\buildScore{\alwaysBuildScore}   %This command builds the score.
\def\hypKernAmt{0pt}	% Initial setting for kerning the hypotheses.

\def\defaultLeftLabel{}
\def\defaultRightLabel{}

\def\myTrue{Y}
\def\bottomAlignFlag{N}
\def\centerAlignFlag{N}

% End of internal parameters and defaults.

\expandafter\ifx\csname newenvironment\endcsname\relax%
% If in TeX:
\message{\BPmessage}
\def\makeatletter{\catcode`\@=11\relax}
\def\makeatother{\catcode`\@=12\relax}
\makeatletter
\def\newcount{\alloc@0\count\countdef\insc@unt}
\def\newdimen{\alloc@1\dimen\dimendef\insc@unt}
\def\newskip{\alloc@2\skip\skipdef\insc@unt}
\def\newbox{\alloc@4\box\chardef\insc@unt}
\makeatother
\else
% If in LaTeX
\typeout{\BPmessage}
\newenvironment{prooftree}%
{\begin{center}\proofSkipAmount \leavevmode}%
{\DisplayProof \proofSkipAmount \end{center} }
\fi
 
\def\thecur#1{\csname#1\number\theLevel\endcsname}

\newcount\theLevel    % This counter is the height of the stack.
\global\theLevel=0		% Initialized to zero
\newcount\myMaxLevel
\global\myMaxLevel=0
\newbox\myBoxA		% Temporary storage boxes
\newbox\myBoxB
\newbox\myBoxC
\newbox\myBoxD
\newbox\myBoxLL		% Boxes for the left label and the right label.
\newbox\myBoxRL
\newdimen\thisAboveSkip		%Internal use: amount to skip above line
\newdimen\thisBelowSkip		%Internal use: amount to skip below line
\newdimen\newScoreStart		% More temporary storage.
\newdimen\newScoreEnd
\newdimen\newCenter
\newdimen\displace
\newdimen\leftLowerAmt%		Amount to lower left label
\newdimen\rightLowerAmt%	Amount to lower right label
\newdimen\scoreHeight%		Score height
\newdimen\scoreDepth%		Score Depth

\setbox\myBoxLL=\hbox{\defaultLeftLabel}%
\setbox\myBoxRL=\hbox{\defaultRightLabel}%

\def\allocatemore{%
	\ifnum\theLevel>\myMaxLevel%
		\expandafter\newbox\curBox%
		\expandafter\newdimen\curScoreStart%
		\expandafter\newdimen\curCenter%
		\expandafter\newdimen\curScoreEnd%
		\global\advance\myMaxLevel by1%
	\fi%
}

\def\prepAxiom{%
	\advance\theLevel by1%
	\edef\curBox{\thecur{myBox}}%
	\edef\curScoreStart{\thecur{myScoreStart}}%
	\edef\curCenter{\thecur{myCenter}}%
	\edef\curScoreEnd{\thecur{myScoreEnd}}%
	\allocatemore%
}

\def\Axiom$#1\fCenter#2${%
	% Get level and correct names set.
	\prepAxiom%
	% Define the boxes
	\setbox\myBoxA=\hbox{$\mathord{#1}\fCenter\mathord{\relax}$}%
	\setbox\myBoxB=\hbox{$#2$}%
	\global\setbox\curBox=%
	     \hbox{\hskip\ScoreOverhangLeft\relax%
		\unhcopy\myBoxA\unhcopy\myBoxB\hskip\ScoreOverhangRight\relax}%
	% Set the relevant dimensions for the boxes
	\global\curScoreStart=0pt \relax
	\global\curScoreEnd=\wd\curBox \relax
	\global\curCenter=\wd\myBoxA \relax
	\global\advance \curCenter by \ScoreOverhangLeft%
	\ignorespaces
}

\def\AxiomC#1{		% Note argument not in math mode
	% Get level and correct names set. 
	\prepAxiom%
        % Define the box.
	\setbox\myBoxA=\hbox{#1}%
	\global\setbox\curBox =%
		\hbox{\hskip\ScoreOverhangLeft\relax%
                        \unhcopy\myBoxA\hskip\ScoreOverhangRight\relax}%
	% Set the relevant dimensions for the boxes 
        \global\curScoreStart=0pt \relax
        \global\curScoreEnd=\wd\curBox \relax
        \global\curCenter=.5\wd\curBox \relax
        \global\advance \curCenter by \ScoreOverhangLeft%
	\ignorespaces
}

\def\prepUnary{%
	\ifnum \theLevel<1 
		\errmessage{Hypotheses missing!}
	\fi%
	\edef\curBox{\thecur{myBox}}%
	\edef\curScoreStart{\thecur{myScoreStart}}%
	\edef\curCenter{\thecur{myCenter}}%
	\edef\curScoreEnd{\thecur{myScoreEnd}}%
}

\def\UnaryInf$#1\fCenter#2${%
	\prepUnary%
	\buildConclusion{#1}{#2}%
	\joinUnary%
	\resetInferenceDefaults%
	\ignorespaces%
}

\def\UnaryInfC#1{
	\prepUnary%
	\buildConclusionC{#1}%
	%Align and join the curBox and the new box into one vbox.
	\joinUnary%
	\resetInferenceDefaults%
	\ignorespaces%
}

\def\prepBinary{%
	\ifnum\theLevel<2 
		\errmessage{Hypotheses missing!}
	\fi%
	\edef\rcurBox{\thecur{myBox}}%   Set up names of right hypothesis
	\edef\rcurScoreStart{\thecur{myScoreStart}}%
	\edef\rcurCenter{\thecur{myCenter}}%
	\edef\rcurScoreEnd{\thecur{myScoreEnd}}%
	\advance\theLevel by-1
	\edef\lcurBox{\thecur{myBox}}% Set up names of left hypothesis
	\edef\lcurScoreStart{\thecur{myScoreStart}}%
	\edef\lcurCenter{\thecur{myCenter}}%
	\edef\lcurScoreEnd{\thecur{myScoreEnd}}%
}

\def\BinaryInf$#1\fCenter#2${%
	\prepBinary%
	\buildConclusion{#1}{#2}%
	\joinBinary%
	\resetInferenceDefaults%
	\ignorespaces%
}

\def\BinaryInfC#1{%
	\prepBinary%
	\buildConclusionC{#1}%
	\joinBinary%
	\resetInferenceDefaults%
	\ignorespaces%
}

\def\prepTrinary{%
	\ifnum\theLevel<3 
		\errmessage{Hypotheses missing!}
	\fi%
	\edef\rcurBox{\thecur{myBox}}%   Set up names of right hypothesis
	\edef\rcurScoreStart{\thecur{myScoreStart}}%
	\edef\rcurCenter{\thecur{myCenter}}%
	\edef\rcurScoreEnd{\thecur{myScoreEnd}}%
	\advance\theLevel by-1
	\edef\ccurBox{\thecur{myBox}}% Set up names of center hypothesis
	\edef\ccurScoreStart{\thecur{myScoreStart}}%
	\edef\ccurCenter{\thecur{myCenter}}%
	\edef\ccurScoreEnd{\thecur{myScoreEnd}}%
	\advance\theLevel by-1
	\edef\lcurBox{\thecur{myBox}}% Set up names of left hypothesis
	\edef\lcurScoreStart{\thecur{myScoreStart}}%
	\edef\lcurCenter{\thecur{myCenter}}%
	\edef\lcurScoreEnd{\thecur{myScoreEnd}}%
}

\def\TrinaryInf$#1\fCenter#2${%
	\prepTrinary%
	\buildConclusion{#1}{#2}%
	\joinTrinary%
	\resetInferenceDefaults%
	\ignorespaces%
}

\def\TrinaryInfC#1{%
	\prepTrinary%
	\buildConclusionC{#1}%
	\joinTrinary%
	\resetInferenceDefaults%
	\ignorespaces%
}

\def\buildConclusion#1#2{% Build lower sequent w/ center at \fCenter position.
	% Define the boxes
        \setbox\myBoxA=\hbox{$\mathord{#1}\fCenter\mathord{\relax}$}%
        \setbox\myBoxB=\hbox{$#2$}%
	% Put them together in \myBoxC
	\setbox\myBoxC =%
	      \hbox{\hskip\ScoreOverhangLeft\relax%
		\unhcopy\myBoxA\unhcopy\myBoxB\hskip\ScoreOverhangRight\relax}%
	% Calculate the center of the \myBoxC string.
	\newScoreStart=0pt \relax%
	\newCenter=\wd\myBoxA \relax%
	\advance \newCenter by \ScoreOverhangLeft%
	\newScoreEnd=\wd\myBoxC%
}

\def\buildConclusionC#1{% Build lower sequent w/o \fCenter present.
        % Define the box.
	\setbox\myBoxA=\hbox{#1}%
	\setbox\myBoxC =%
		\hbox{\hbox{\hskip\ScoreOverhangLeft\relax%
                        \unhcopy\myBoxA\hskip\ScoreOverhangRight\relax}}%
	% Calculate kerning to line up centers
	\newScoreStart=0pt \relax%
	\newCenter=.5\wd\myBoxC \relax%
	\newScoreEnd=\wd\myBoxC%
        \advance \newCenter by \ScoreOverhangLeft%
}

\def\joinUnary{%Align and join \curBox and \myBoxC into a single vbox
	\global\advance\curCenter by -\hypKernAmt%
	\ifnum\curCenter<\newCenter%
		\displace=\newCenter%
		\advance \displace by -\curCenter%
		\kernUpperBox%
	\else%
		\displace=\curCenter%
		\advance \displace by -\newCenter%
		\kernLowerBox%
	\fi%
        \ifnum \newScoreStart < \curScoreStart %
		\global \curScoreStart = \newScoreStart \fi%
	\ifnum \curScoreEnd < \newScoreEnd %
		\global \curScoreEnd = \newScoreEnd \fi%
	% Leave room for the left label.
	\ifnum \curScoreStart<\wd\myBoxLL%
		\global\displace = \wd\myBoxLL%
		\global\advance\displace by -\curScoreStart%
		\kernUpperBox%
		\kernLowerBox%
	\fi%
	% Draw the score
	\buildScore%
	% Form the score and labels into a box.
	\buildScoreLabels%
	% Form the new box and its dimensions
	\global \setbox \curBox =%
		\vbox{\box\curBox%
			\vskip\thisAboveSkip \relax%
			\nointerlineskip\box\myBoxD%
			\vskip\thisBelowSkip \relax%
			\nointerlineskip\box\myBoxC}%
	\global \curScoreStart=\newScoreStart%
	\global \curScoreEnd=\newScoreEnd%
	\global \curCenter=\newCenter%
}
\def\kernUpperBox{%
		\global\setbox\curBox =%
			\hbox{\hskip\displace\box\curBox}%
		\global\advance \curScoreStart by \displace%
		\global\advance \curScoreEnd by \displace%
		\global\advance\curCenter by \displace%
}
\def\kernLowerBox{%
		\global\setbox\myBoxC =%
			\hbox{\hskip\displace\unhbox\myBoxC}%
		\global\advance \newScoreStart by \displace%
		\global\advance \newScoreEnd by \displace%
		\global\advance\newCenter by \displace%
}

\def\joinBinary{% Construct the binary inference into a vbox.
	% Join the two hypotheses's boxes into one hbox.
	\setbox\myBoxA=\hbox{\theHypSeparation}
	\lcurScoreEnd=\rcurScoreEnd%
	\advance\lcurScoreEnd by\wd\lcurBox%
	\advance\lcurScoreEnd by\wd\myBoxA%
	\displace=\lcurScoreEnd%
	\advance\displace by -\lcurScoreStart%
	\lcurCenter=.5\displace%
	\advance\lcurCenter by\lcurScoreStart%
	\setbox\lcurBox=%
		\hbox{\box\lcurBox\unhcopy\myBoxA\box\rcurBox}%
	% Adjust center of upper hypotheses according to how much
	%   the lower sequent is off-center.
	\displace=\newCenter%
	\advance\displace by -.5\newScoreStart%
	\advance\displace by -.5\newScoreEnd%
	\advance\lcurCenter by \displace%
	%Align and join the curBox and the two hypotheses's box into one vbox.
	\edef\curBox{\lcurBox}%
	\edef\curScoreStart{\lcurScoreStart}%
	\edef\curScoreEnd{\lcurScoreEnd}%
	\edef\curCenter{\lcurCenter}%
	\joinUnary%
}

\def\joinTrinary{% Construct the trinary inference into a vbox.
	% Join the three hypotheses's boxes into one hbox.
	\setbox\myBoxA=\hbox{\theHypSeparation}
	\lcurScoreEnd=\rcurScoreEnd%
	\advance\lcurScoreEnd by\wd\lcurBox%
	\advance\lcurScoreEnd by\wd\ccurBox%
	\advance\lcurScoreEnd by2\wd\myBoxA%
	\displace=\lcurScoreEnd%
	\advance\displace by -\lcurScoreStart%
	\lcurCenter=.5\displace%
	\advance\lcurCenter by\lcurScoreStart%
	\setbox\lcurBox=%
		\hbox{\box\lcurBox\unhcopy\myBoxA\box\ccurBox%
				  \unhcopy\myBoxA\box\rcurBox}%
	% Adjust center of upper hypotheses according to how much
	%   the lower sequent is off-center.
	\displace=\newCenter%
	\advance\displace by -.5\newScoreStart%
	\advance\displace by -.5\newScoreEnd%
	\advance\lcurCenter by \displace%
	%Align and join the curBox and the two hypotheses's box into one vbox.
	\edef\curBox{\lcurBox}%
	\edef\curScoreStart{\lcurScoreStart}%
	\edef\curScoreEnd{\lcurScoreEnd}%
	\edef\curCenter{\lcurCenter}%
	\joinUnary%
}

\def\DisplayProof{%
	% Display (and purge) the proof tree.
	% Choose the appropriate vertical alignment.
	\ifnum \theLevel=1 \relax \else%x
		\errmessage{Proof tree badly specified.}%
	\fi%
	\edef\curBox{\thecur{myBox}}%
	\ifx\bottomAlignFlag\myTrue%
		\displace=0pt%
	\else%
		\displace=.5\ht\curBox%
		\ifx\centerAlignFlag\myTrue\relax
		\else%
		      	\advance\displace by -3pt%
		\fi%
	\fi%
	\leavevmode%
	\lower\displace\hbox{\copy\curBox}%
	\global\theLevel=0%
	\global\def\alwaysBuildScore{\defaultBuildScore}% Restore "always"
	\global\def\alwaysScoreFiller{\defaultScoreFiller}% Restore "always"
	\def\bottomAlignFlag{N}
	\def\centerAlignFlag{N}
	\resetInferenceDefaults%
	\ignorespaces
}

\def\buildSingleScore{% Make an hbox with a single score.
	\displace=\curScoreEnd%
	\advance \displace by -\curScoreStart%
	\global\setbox \myBoxD =%
		\hbox to \displace{\expandafter\xleaders\theScoreFiller\hfill}%
	%\global\setbox \myBoxD =%
		%\hbox{\hskip\curScoreStart\relax \box\myBoxD}%
}

\def\buildDoubleScore{% Make an hbox with a double score.
	\buildSingleScore%
	\global\setbox\myBoxD=%
		\hbox{\hbox to0pt{\copy\myBoxD\hss}\raise2pt\copy\myBoxD}%
}

\def\buildNoScore{% Make an hbox with no score (raise a little anyway)
	\global\setbox\myBoxD=\hbox{\vbox{\vskip1pt}}%
}

\def\doubleLine{%
	\gdef\buildScore{\buildDoubleScore}% Set next score to this type
	\ignorespaces
}
\def\alwaysDoubleLine{%
	\gdef\alwaysBuildScore{\buildDoubleScore}% Do double for rest of proof.
	\gdef\buildScore{\buildDoubleScore}% Set next score to be double
	\ignorespaces
}
\def\singleLine{%
	\gdef\buildScore{\buildSingleScore}% Set next score to be single
	\ignorespaces
}
\def\alwaysSingleLine{%
	\gdef\alwaysBuildScore{\buildSingleScore}% Do single for rest of proof.
	\gdef\buildScore{\buildSingleScore}% Set next score to be single
	\ignorespaces
}
\def\noLine{%
	\gdef\buildScore{\buildNoScore}% Set next score to this type
	\ignorespaces
}
\def\alwaysNoLine{%
	\gdef\alwaysBuildScore{\buildNoScore}%Do nolines for rest of proof.
	\gdef\buildScore{\buildNoScore}% Set next score to be blank
	\ignorespaces
}
\def\solidLine{%
	\gdef\theScoreFiller{\ruleScoreFiller}%	Use solid horizontal line.
	\ignorespaces
}
\def\alwaysSolidLine{%
	\gdef\alwaysScoreFiller{\ruleScoreFiller}% Do solid for rest of proof
	\gdef\theScoreFiller{\ruleScoreFiller}%	Use solid horizontal line.
	\ignorespaces
}
\def\dottedLine{%
	\gdef\theScoreFiller{\dottedScoreFiller}% Use dotted horizontal line.
	\ignorespaces
}
\def\alwaysDottedLine{%
	\gdef\alwaysScoreFiller{\dottedScoreFiller}% Do dotted for rest of proof
	\gdef\theScoreFiller{\dottedScoreFiller}% Use dotted horizontal line.
	\ignorespaces
}
\def\dashedLine{%
	\gdef\theScoreFiller{\dashedScoreFiller}% Use dashed horizontal line.
	\ignorespaces
}
\def\alwaysDashedLine{%
	\gdef\alwaysScoreFiller{\dashedScoreFiller}% Do dashed for rest of proof
	\gdef\theScoreFiller{\dashedScoreFiller}% Use dashed horizontal line.
	\ignorespaces
}
\def\kernHyps#1{%
	\gdef\hypKernAmt{#1}%
	\ignorespaces
}
\def\insertBetweenHyps#1{%
	\gdef\theHypSeparation{#1}%
	\ignorespaces
}

\def\centerAlignProof{%
	\def\centerAlignFlag{Y}%
	\def\bottomAlignFlag{N}%
	\ignorespaces
}
\def\bottomAlignProof{%
	\def\centerAlignFlag{N}%
	\def\bottomAlignFlag{Y}%
	\ignorespaces
}
\def\normalAlignProof{%
	\def\centerAlignFlag{N}%
	\def\bottomAlignFlag{N}%
	\ignorespaces
}

\def\LeftLabel#1{%
	\global\setbox\myBoxLL=\hbox{{#1}\hskip\labelSpacing}%
	\ignorespaces
}
\def\RightLabel#1{%
	\global\setbox\myBoxRL=\hbox{\hskip\labelSpacing #1}%
	\ignorespaces
}

\def\buildScoreLabels{%
	\scoreHeight = \ht\myBoxD%
	\scoreDepth = \dp\myBoxD%
	\leftLowerAmt=\ht\myBoxLL%
	\advance \leftLowerAmt by -\dp\myBoxLL%
	\advance \leftLowerAmt by -\scoreHeight%
	\advance \leftLowerAmt by \scoreDepth%
	\leftLowerAmt=.5\leftLowerAmt%
	\rightLowerAmt=\ht\myBoxRL%
	\advance \rightLowerAmt by -\dp\myBoxRL%
	\advance \rightLowerAmt by -\scoreHeight%
	\advance \rightLowerAmt by \scoreDepth%
	\rightLowerAmt=.5\rightLowerAmt%
	\displace = \curScoreStart%
	\advance\displace by -\wd\myBoxLL%
	\global\setbox\myBoxD =%
		\hbox{\hskip\displace%
			\lower\leftLowerAmt\copy\myBoxLL%
			\box\myBoxD%
			\lower\rightLowerAmt\copy\myBoxRL}%
	\global\thisAboveSkip = \ht\myBoxLL%
	\global\advance \thisAboveSkip by -\leftLowerAmt%
	\global\advance \thisAboveSkip by -\scoreHeight%
	\ifnum \thisAboveSkip<0 %
		\global\thisAboveSkip=0pt%
	\fi%
	\displace = \ht\myBoxRL%
	\advance \displace by -\rightLowerAmt%
	\advance \displace by -\scoreHeight%
	\ifnum \displace<0 %
		\displace=0pt%
	\fi%
	\ifnum \displace>\thisAboveSkip %
		\global\thisAboveSkip=\displace%
	\fi%
	\global\thisBelowSkip = \dp\myBoxLL%
	\global\advance\thisBelowSkip by \leftLowerAmt%
	\global\advance\thisBelowSkip by -\scoreDepth%
	\ifnum\thisBelowSkip<0 %
		\global\thisBelowSkip = 0pt%
	\fi%
	\displace = \dp\myBoxLL%
	\advance\displace by \rightLowerAmt%
	\advance\displace by -\scoreDepth%
	\ifnum\displace<0 %
		\displace = 0pt%
	\fi%
	\ifnum\displace>\thisBelowSkip%
		\global\thisBelowSkip = \displace%
	\fi
	\global\thisAboveSkip = -\thisAboveSkip%
	\global\thisBelowSkip = -\thisBelowSkip%
	\global\advance\thisAboveSkip by\extraVskip% Extra space above line
	\global\advance\thisBelowSkip by\extraVskip% Extra space below line
}

\def\resetInferenceDefaults{%
	\global\def\theHypSeparation{\defaultHypSeparation}%
	\global\setbox\myBoxLL=\hbox{\defaultLeftLabel}%
	\global\setbox\myBoxRL=\hbox{\defaultRightLabel}%
	\global\def\buildScore{\alwaysBuildScore}%
	\global\def\theScoreFiller{\alwaysScoreFiller}%
	\gdef\hypKernAmt{0pt}% Restore to zero kerning.
}

